  |
 The "C" designator was applied to FT cab units so numbered in the manner shown on 11C at Arkansas City in February 1962. Unit 111C had previously carried numbers 426L and 135C (its original number). Note there are numbers in the nose number boards. -John McCall |
| Refer to the aperture card reprints and the modeling data for additional information on modeling Santa Fe FT's. |
 At Barstow in July 1947, 111 waits for an asignment at the engine terminal. Note the curved sides of the dynamic brakes which were unique to units originally numbered 104 through 117. The red separating stripe stops at the cab door indicating this unit was repainted by the Santa Fe since delivery. The fifth port hole on the first B-unit is also clearly visible. -John McCall Collection |
|
|
